Home > News > Content

Measures Of Centrifugal Pump Operation Life

Nov 30, 2019

The important component of bearing plunger pump for hydraulic plunger pump is that if the bearing has clearance, the normal clearance of three pairs of friction pairs inside the pump cannot be achieved, and the thickness of hydrostatic support oil film of each friction pair will be damaged, so as to reduce the service life of the bearing of plunger pump. The outer circle of gear pump gear is seriously worn.

Empty the internal liquid, clean and rotate the gear 180 degrees regularly to prevent the shaft from deformation until the high temperature oil pump is completely cooled. How to use stainless steel gear pump? What is the application of stainless steel gear pump? Stainless steel gear pump series is mainly composed of gear shaft pump body safety valve shaft end seal and other components. The gear has high hardness and strength after heat treatment, and is installed in the replaceable shaft sleeve with the shaft for operation.

Main characteristics: according to the different metal performance index, the strength and plasticity, toughness are also different. What are the differences between KCB gear pump and KCB explosion-proof gear pump? Transmission of high viscosity rotor pump (gear pump): there are four common types of transmission of rotor pump, which can be selected by customers according to their own conditions.

Compared with these methods, although the installation and removal of the spreader is relatively complex, its use effect is good, and its comprehensive economic and technical indicators are high. At this time, the volume between the teeth at the meshing of the teeth on the discharge cavity side is gradually reduced, and the liquid is discharged.

The water in the oil evaporates into water vapor, which is condensed in the condenser and then discharged. The flow of ZYB heavy oil residue oil pump can not be adjusted by the valve on the discharge pipeline, but by the bypass pipe or by changing the reciprocating times of the piston to change the stroke of the piston.